BS EN 61512-3:2008 BSl Standards Publication Batch control Part 3: General and site recipe models and representation bsi. ..making excellence a habit BSEN 61512-3:2008 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 61512-3:2008. It is identical to IEC 61512-3:2008. It supersedes DD IEC/PAS 61512-3:2004 which is withdrawn. The UK participation in its preparation was entrusted by Technical CommitteeGEL/65,Measurementandcontrol,toSubcommittee GEL/65/1, System considerations. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @BSI2009 ISBN9780580544415 ICS 25.040.40; 35.240.50 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2009. Amendments issued since publication Amd. No. Date Text affected BSEN61512-3:2008 EUROPEANSTANDARD EN 61512-3 NORMEEUROPEENNE EUROPAISCHE NORM September2008 ICS 25.040.40; 35.240.50 English version Batch control - Part 3: General and site recipe models and representation (IEC61512-3:2008) Controle-commandedesprocessus Chargenorientierte Fahrweise defabricationparlots Teil 3: Modelle und Darstellungen Partie 3: Modeles et représentation vonVerfahrens-undWerksrezepten des recettes générales (IEC61512-3:2008) et des recettes de site (CEI61512-3:2008) This European Standard was approved by CENELEC on2008-08-01.CENELECmembers are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status ofa national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicationto the Central Secretariat ortoany CENELECmember. to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. CENELEC EuropeanCommitteeforElectrotechnical Standardization Comite Europeen de Normalisation Electrotechnique EuropaischesKomiteefurElektrotechnische Normung Central Secretariat: rue de Stassart 35, B -1050 Brussels @2008CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No.EN 61512-3:2008 E BS EN 61512-3:2008 EN61512-3:2008 - 2 - Foreword The textof document 65A/496/CDV,future edition1ofIEC61512-3,preparedbySC65A,System aspects, of IEc TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel voteand was approvedbyCENELEC as EN61512-3on2008-08-01. EN 61512-3 is to be used in conjunction with EN 61512-1 and EN 61512-2. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-08-01 AnnexZAhas beenadded by CENELEC Endorsementnotice The text of the International Standard IEC 61512-3:2008 was approved by CENELEC as a European Standard without any modification. BSEN61512-3:2008 - 3 - EN61512-3:2008 Annex ZA (normative) Normativereferencestointernationalpublications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (